KY-360L Offline Double Side Curved Cutting Machine

KY-360l Offline Double Side Curved Cutting Machine For large-size PCB, effective cutting size is 450*550mm

KY-360L  offline Curve splitting machine

Item KY-360L
Effective cutting size 450*550mm
Cutting function Stamp hole,bridge and arc,etc..
Machining table Double side
Cutting accuracy ±0.05mm
Repeat repeat positioning Accuracy ±0.01mm
Maximum moving speed X,Y1,Y2 axis:1000mm/s, Z axis:800mm/s
Tool change mode Manual tool change
Spindle speed Max:60000rpm
Tool monitoring Automatic tool sinking,tool breaking,sliding tool detection,automatic tool height correction function
Cutting speed 5-100mm/s adjustable
PCB cutting thickness 0.3-3.0mm
Program teaching method The whole plate jigsaw puzzle, picture drawing line teaching
Control method PC precision Four asix control system
X,Y1,Y2,Z axis drive method Panasonic A6 series servo drive
Suitable for milling cutter size 0.8-3.0mm
Host power specification AC220V 50/60Hz single phase
Machine size 1370(L)*1520(W)*1400(H)mm
Machine weight 700KG
Dust collector power 2.2KW
Dust collector power supply specification AV380V Three-phase
Dust collector size 665(L)*635(W)*1610(H)mm
Dust collector weight 155KG
Dust collection mode Lower dust collection/ Upper dust collection (optional)

KY-360l offline Curve splitting machine

1.Automatic MARK positioning correction system, moving path display tracking, automatic focus more correct function, higher cutting accuracy, to meet higher precision products.
2. Automatic alignment correction function, higher cutting accuracy, as long as the PCB is placed within the range of 80mm2, the machine vision can automatically route correction, relaxing the operator’s requirements for accuracy when placing the board, greatly improving work efficiency.
3. Using two mobile platforms as PCB exchange up and down substrate devices, can effectively reduce the machine idle time, and thus achieve higher production efficiency, production capacity increased to 3 to 4 times of manual depaneling.

The tool breakage detection function can monitor the tool usage status in real time. The tool height automatic correction function can avoid the deviation problem of tool height each time when changing tools manually and automatically, and prevent the risk of damaging the PCB board in the last sinking section and the phenomenon of the bottom component being cut by mistake.

 

Scroll to Top