KY-350 Online PCBA Solvent Brush Cleaning Machine

It can effectively clean organic and inorganic pollutants such as rosin flux, water-soluble flux, no-clean flux/solder paste and other organic and inorganic pollutants remaining on the PCBA surface after DIP/THT soldering.

The appearance of the fuselage is entirely made of 304 stainless steel

Online solvent-based PCBA brush cleaning machine
Mainly used in military, aviation, aerospace electronics, medical, automotive new energy, automotive power supply board single-sided solder joints, coated products and high-end precision products, multi-species, high-volume PCBA board cleaning, can effectively clean DIP / THT PCBA soldering surface residual rosin flux, water-soluble flux, no-clean flux / solder paste and other organic, inorganic pollutants.

Item KY-350
Machine size 2100mm(L) × 1100mm(W) × 1100mm(H) (L:350mm with entrance connection)
Maximum size of PCBA board cleaning 350mm(W) × 100mm(H) Unlimited length
Cleaning drum size Ø120mm
Cleaning disc size Ø350mm
Spindle speed 0-500/min (adjustable)
Process flow Entry plate – Chemical pre-wash – Disc brush scrubbing – Chemical cleaning – Disc brush scrubbing – Fan drying
Capacity calculation Transfer speed: 0.1~1.5m/min(adjustable), suggest working speed is adjusted to 0.4-1m/min
Basis: According to 350mmX100mm board, 1m/min working speed;
Hourly output: about 600PCS/H (speed/length*60) This output is for reference only, subject to actual)
Height of conveying surface 750±50mm(Adjustable)
Inlet and outlet direction Left in and right out (viewed from the front window of the unit)
Exhaust flow Approx. 6M³/Min ,Diameter of exhaust air outlet: 120mm, 2 front and back
Weight Approx. 310KG
Power requirement AC220V/50H, total power 500W
    1. Online solvent-based PCBA brush cleaning machine
  1. Visualization of the whole process: the cleaning room is equipped with visualization window, cleaning process is clear at a glance, fully automatic cleaning mode: the use of chain claw rail transmission, smooth and efficient, automatic disc brush, rolling brush process.
  2. The most scientific cleaning design: using a combination of rolling brush and disc brush, completely solve the cleaning blind area, rolling brush and disc can be removed.
  3. cleaning built-in filter device can realize the solvent recycling, reduce the amount of solvent.
  4. comprehensive cleaning system: compatible with running water or chemical cleaning, for the surface residual water-soluble flux, solder paste and other organic, inorganic pollutants for thorough and effective cleaning.
  5. The body of the village quality: the overall stainless steel body, resistant to acid, alkaline and other cleaning solutions.
Scroll to Top