High-end large wave soldering
| Model | TOP KY-350C | TOP KY-500CL |
| Dimensions | L3600×W1400×H1750mm | |
| Rack size | L4300×W1450×H1750mm | |
| Weight | Approx;2000kg | Approx;2200kg |
| Starting power | 25KW | 32KW |
| Operating power | 5KW | 6KW |
| Control method | Computer+PLC control | |
| Power supply | AC380V 50HZ | |
| Spray system | ||
| Dnve mode | Stepping motor | |
| Spray pressure | 0.3-0.5MPa | |
| Nozzle cleaning | Auto Wash | |
| Flux flow control | 0-100ml adjustable | |
| Flux addition | Auto | |
| Exhaust pipe | 200mm in diamete | |
| Ventilation method | Up Exhaus | |
| Preheating system | ||
| Preheating method | Hot air /IR tube | |
| Number of preheating zones | 3 | |
| Preheating zone length | 1800mm | |
| Pre-heat temperature | Room temperature-250° | |
| Preheating time | Approx.15min | |
| Transportation system | ||
| Pcb width | 50-350 MM | 50-500 MM |
| Pcb transport direction | left to right (right to left is possible | |
| Transport speed | 0-2000mm/min | |
| Transport height | 750±20mm | |
| Pcb component height | Top 120mm Bottom 15mm | |
| Speed control | Frequency Variable frequency speed control | |
| Titanium claw | Quick-Change Finger /heavy claw | |
| Rall angle | 3°-7° | |
| Track width adjustment method | Auto | |
| Tin funace system | ||
| Wave mode | Motor Drive | |
| Tin furnace material | titanium alloy/ductile iron | |
| Tin furnace heating method | Extenal heating | |
| Tin fumace power | 13.5kw | 16kw |
| Stove temperature | Maximum 350℃ | |
| Tin furnace capacity | 450Kg | 600Kg |
| Way of moving | Auto | |
| Peak motor power | 1/2HPx2 3P220VAC | |
| Tin furnace melting time | APPROX:120min | |
| Cooling system | ||
| Cooling method | Forced air | |
| Wash claws | Auto | |
High-end large wave soldering
- Appearance design: novel, using phosphating spraying treatment process, no paint falling, durable.
- Hot air preheating: modular preheating, convection hot air preheating zone, frequency conversion to adjust the air volume, so that the PCB can obtain a perfect preheating effect.
- Alloy chain claw: equipped with heavy claw + heavy-load track
- Adjustable nozzle design: the wave crest can be adjusted with the width of the PCB board, which greatly reduces the amount of tin oxidation when welding the small PCB board.
- Transmission mechanism: adopts precise modular design, accurate transmission, long life, and easy maintenance.
- Transportation system: closed-loop control. Stepless speed regulation, precise control of PCB preheating and welding time.
- Heating system: The temperature adopts PID closed-loop control, and the temperature control is stable and reliable.
- Flux spray device: stepper motor closed-loop automatic tracking spray system, spray width and spray time are automatically adjusted, and the spray time can be set in advance and extended as needed; isolated design, the whole can be pulled out and disassembled, and quick cleaning and maintenance;
- Cooling module: large air volume upper and lower rapid cooling module
- Control system: intelligent control program, using brand electrical appliances to ensure stable operation of the equipment.
- Human-machine interface: using independent brand computers to ensure system reliability and stability.
- Automatic power on and off: can be carried out according to the date, time and temperature control parameters set by the user.
- Fault prompt: system fault self-diagnosis, automatic display of causes, troubleshooting methods can be queried at any time.
- Economic operation: automatic spraying of flux on the board, automatic wave peak, minimize the use of flux and tin oxidation.
- Protection system: short circuit and overcurrent protection, to protect the key electrical components of the equipment.
