Description

1. Knife type work, suitable for PCBs of various thicknesses, with a cutting stroke of 1-2 mm or less, without any operational safety concerns.
2.Reduce the internal stress generated during plate cutting to below 180μE to avoid tin cracking and damage to precision parts.
3.The width between the edge of the separable V-groove and the part is at most 0.3mm, and the height is 70mm.
4. The cutting rate is 1 second/1 division, controlled by a pedal pneumatic switch.
5. The cutting knife set is passively started, which can safely grasp the cutting line and position; Low cutting stress, not easy to form cracks.
6. Non roller (wheel knife, knife walking) cutting, no dust, no motor drive, no carbon powder pollution.
7. The blade is guaranteed to be used for 6000000 times without power supply, so there is no electrical product loss and replacement.
8. Use 5-7KG air pressure without specific cutting site; Wipe the appearance with rust preventive maintenance oil.