Products >> Cleaning Equipment >>
Pneumatic Stencil Cleaning Machine
- Product No.：2022823143110
1. Basic Specifications
Applicable steel mesh size: 750 (L) × 750(W) × 40mm(H)
Maximum volume of liquid tank: 42L (man)
Optimal liquid usage: 22 ~ 35 L
Cleaning method: 360 ° rotary liquid spray cleaning and compressed air drying
Cleaning time: 3-5min (Solder paste)
Drying time: 3-5min
External air source: 0.45-0.7 (MPA)
Gas consumption: (350-500) l / min
Vent size: Φ one hundred × 30mm(H); Maximum gravitational wind speed: 3m / see
Filtration system: primary filter box filtration: 10 ㎛ (filter impurities and labels); Three stage filter element filtration: 0.5 ㎛ (filter tin balls and rosin particles)
Net weight of machine: about 230kg
Machine size: 950 (L) × 800(W) × 1680mm(H)
2.Product Features:
The power source used by this machine is compressed air, which does not require any power input, so that its safety performance reaches 99.99%, and there is no requirement for liquid. All control elements are imported brands, so that the machine operates stably and has a long service life. Reduce the after-sales service after the warranty period. Humanized design and one button operation make it easy to use and complete the cleaning and drying process easily. The waste gas generated by drying is discharged through the exhaust device with special structure inside the machine to reduce the volatilization of liquid, reduce the consumption of liquid and compressed air, and minimize the emission of liquid odor.
Space requirements:
To ensure the convenience of equipment operation, replacement of accessories and equipment maintenance, please reserve installation space according to the following dimensions:External dimension of equipment: l950mm * w800mm * h1680mm
Note: more than 1m space must be reserved on the right side of the equipment operation surface to facilitate liquid filling and discharging.
(It is recommended to reserve l3000mm * w3000mm * h2000mm)
3. Product Introduction
Equipment introduction:This machine uses compressed air as its energy source and belongs to a new type of high-performance pneumatic cleaning equipment. Manually put the screen plate into the cleaning room. After adjusting the cleaning and drying time, press the start button, and the screen plate will be automatically cleaned and dried. When the set time arrives, it will stop automatically Open the door to reset the time, so as to realize the next work flow, facilitate the operators to clean the screen, and improve the production efficiency. Among them, the liquid used for cleaning can be recycled in this machine, which greatly reduces the consumption and cost of the liquid, greatly shortens the operation time, and the operators do not need to contact the liquid, so as to avoid harm to the human body to the greatest extent.
Applicable steel mesh size: 750 (L) × 750(W) × 40mm(H)
Maximum volume of liquid tank: 42L (man)
Optimal liquid usage: 22 ~ 35 L
Cleaning method: 360 ° rotary liquid spray cleaning and compressed air drying
Cleaning time: 3-5min (Solder paste)
Drying time: 3-5min
External air source: 0.45-0.7 (MPA)
Gas consumption: (350-500) l / min
Vent size: Φ one hundred × 30mm(H); Maximum gravitational wind speed: 3m / see
Filtration system: primary filter box filtration: 10 ㎛ (filter impurities and labels); Three stage filter element filtration: 0.5 ㎛ (filter tin balls and rosin particles)
Net weight of machine: about 230kg
Machine size: 950 (L) × 800(W) × 1680mm(H)
2.Product Features:
The power source used by this machine is compressed air, which does not require any power input, so that its safety performance reaches 99.99%, and there is no requirement for liquid. All control elements are imported brands, so that the machine operates stably and has a long service life. Reduce the after-sales service after the warranty period. Humanized design and one button operation make it easy to use and complete the cleaning and drying process easily. The waste gas generated by drying is discharged through the exhaust device with special structure inside the machine to reduce the volatilization of liquid, reduce the consumption of liquid and compressed air, and minimize the emission of liquid odor.
Space requirements:
To ensure the convenience of equipment operation, replacement of accessories and equipment maintenance, please reserve installation space according to the following dimensions:External dimension of equipment: l950mm * w800mm * h1680mm
Note: more than 1m space must be reserved on the right side of the equipment operation surface to facilitate liquid filling and discharging.
(It is recommended to reserve l3000mm * w3000mm * h2000mm)
3. Product Introduction
Equipment introduction:This machine uses compressed air as its energy source and belongs to a new type of high-performance pneumatic cleaning equipment. Manually put the screen plate into the cleaning room. After adjusting the cleaning and drying time, press the start button, and the screen plate will be automatically cleaned and dried. When the set time arrives, it will stop automatically Open the door to reset the time, so as to realize the next work flow, facilitate the operators to clean the screen, and improve the production efficiency. Among them, the liquid used for cleaning can be recycled in this machine, which greatly reduces the consumption and cost of the liquid, greatly shortens the operation time, and the operators do not need to contact the liquid, so as to avoid harm to the human body to the greatest extent.
Previous Product：PCB Cleaning machine
Next Product：Fixture Cleaning Machine
WhatsApp 
Mail inquiry